Knowledge catalogue
Hey locallama! We recently open sourced a Qwen3-TTS 1.7B implementation that achieves 10 requests per second (RPS) and sub-50 ms p95 time-to-first-audio (TTFA) while maintaining real-time playback on
So what’s actually the best local AI harness rn? I’ve read a TON about this already and somehow ended up more confused than when I started so I figured screw it, let the community decide. Right now I
tldr: went from 16~ t/s to 27~ t/s generation. got my usable context up from 220k to the full 262k without sacrificing anything. prefill also increased from 376 to 573 command I ended up with, fwiw: l
AirLLM dramatically reduces inference memory usage, letting 70B large language models run on a single 4GB GPU card — without quantization, distillation, or pruning. You can even run 405B Llama 3.1 on
AQuA's preprint uses 'recursive self-improvement' for a bounded research loop. It does not say the research-agent LM rewrites its own weights. The paper separates three objects: The language model dri
I'm introducing Aurora-80K, a small language model with exactly 80 thousand parameters. It uses a factorized 4,096-token vocabulary despite having only 80K parameters. The benchmarks: Wikitext-2 BPB:
https://omlx.ai/benchmarks/performance/2pko3m1k - you can expand the raw args, but I have full annotations of what worked and what didn't. I'm now testing the model on acutal coding and haven't seen a
IQ quants are particularly slow on CPU at large batch sizes (what you'd see for imatrix and perplexity) Benchmark numbers I ran PPL against master and this PR to get speed and numbers on --chunks 50 f
Hey LocalLlama, Henry from Cactus here! When we trained Needle 2, I had a strict rule to not expose the model to any data sample that remotely felt like these benchmarks. It seemed over-the-top, but b
I see https://github.com/linuxid10t/llama.cpp/tree/feature/g9v3-support but yeah... Considering that some results place it above Qwen 3.6 27B (the top performer until a few days ago) and that it is an
A majority of users in this sub use LLMs for coding/agentic tasks and I see why a lot of value is put into them but many try to say 'Well coding has improved therefore it can just use tool calling and
Howdy once again, I had a request to try out 5.3 on the benchmarks - they're unsaturated so it's a fun test right now! This one was interesting because I accidentally ran it on all 36 problems (rip 20
I run local models on a 128GB Strix Halo and restart llama.cpp fairly often while testing builds, backends and model parameters. The annoying part is long-running agent sessions. Hermes/OpenCode sessi
I pre-trained a 1.02-billion-parameter on Kimi K3 replica trained on 5.00 billion decontaminated tokens for $250. This model has 1.02 billion parameters, of which 145 million are active per token. It
Four days ago I released a hyper-optimized Qwen3.8-27B inference engine for an RTX 3090 (82 tps single request, 672 peak). Since then it went to ~114, then ~138 tps single-user with DFlash2 drafting a
AntLing has released the full six-checkpoint matrix for the Ling-3.0 base model. tiny: pretrained, mid-trained, WSM-merged flash: pretrained, mid-trained, WSM-merged The concrete artifact is six separ
Just got the setup dialed in yesterday. Getting really good results and is making 3.8 usage feel faster in hermes. I got Qwen to specifically use Ling tiny for simple tasks like context compression an
Hey guys! Supra2-Medium is finally out! It's a 25M parameters qwen3 architecture model trained entirely from scratch (on our new rig: RTX 5060 Ti 16GB + the new RTX 5060 8GB!). Here's how it competes
The pelican on a bicycle is sooo outdated, so I came up with a new, improved version. Qwen3.8-27b medium (UD-Q4_K_XL) vs. Sol 5.6 high vs. Qwen3.6-35B (UD-Q6_K_XL) Prompt (only real with typo!): 'Crea
Not everyone has the disposable income to build a small data center, so making this post for the underdogs as I was very surprised by the performance/results of this 35B MOE model. Context is admitted
I'm testing it since release, now with UD 3.0 in my AMD R9700 with ROCm, I always read everywhere that F16 and q8_0 for KV cache are essentially the same... well, I tested it and I can see differences
Off a single prompt, given my credentials and the name of my university, qwen3.8-27b was able to successfully pull my class schedule from the kinda shitty and convoluted web of university websites. It
https://reddit.com/link/1vtkgdj/video/595yn0ckdjkh1/player I wanted to try out Qwen3.8 27B 's SVG capabilities but with something different than the pelican on a bicycle. Promt was literally just : cr
I benchmarked Qwen3.8-27B on MathArena/aime_2026 dataset, comparing BF16 and FP8 weights at medium and xhigh reasoning effort. Interesting findings are: quantized FP8 xhigh is better than BF 16 medium
Like many of you I've spent the last few days throwing Qwen3.8-27B against all of my usual use-cases and personal tasks/harnesses and workflows. It's great, phenomenal sometimes, but that's not what t
I chose to do this thing, not because it was hard, but because it was silly. Posts kept discussing how 3.8 and 3.6 were functionally the same, but based on training (3.8 does have seven new tokens!)..
This is gonna seem crazy off-topic, but I saw Spider-Man the other day and couldn’t help but notice how well executed E.V. is as an agentic system. compared to Jarvis, it felt much more grounded and c
They released both GGUFs & custom llama.cpp fork today. 35B MOE in 7GB size which's good for Mobile & Edge devices(Also low memory systems). Up to 120 t/s on Consumer Laptop. GGUFs: https://huggingfac
From the screenshots: Hy4 is now live, labeled 'Expert-Level Model' + 'Use Tools to Solve Problems' Hy3 is tagged with 'New Upgrade,' positioned as a brand-new general-purpose model DeepSeek, focused
Component Validated configuration Motherboard ASRock Rack SPC621D8U-2T/OVH CPU Xeon Gold 6330 (Get gold/platinum if interested in Optane Pmem gimmicks) GPU fabric Two Broadcom/PLX PEX88096 islands, ei
Hey everyone, Posted TinySearch here a few versions ago and got a bunch of useful feedback, so figured I'd post an update because the thing has changed quite a bit since then. Repo: [https://github.co
I have been using local models on/off for like 2 years or so but never really used them extensively because the closed ones were always much better. Once Qwen 3.8 27B was released I decided to give it
None has undergone post-training, giving researchers flexible starting points for continued pre-training, fine-tuning, and further research. Two key highlights: - They use WSM to replace LR decay with
llama.cpp pr #27342 adds dflash2, so i rented an rtx 6000 and ran the same four prompts through four decoding setups on qwen3.8 27B median results over the four tasks: baseline 47.4 tok/s mtp 114.7 to
I think AA's intelligence/cost plot is seriously misleading, so I decided to make my own. Their plot is in the second image. All points are at max thinking. All intelligence index scores are from AA.
Hello everyone, tried so hard to optimize my config and finally I simply get up to 70 t/s with q6 variant. And wanted to share with you guys so that other people with the same setup can enjoy. Please
Edit: Title says 134 tps, it's actually 138 -- keep in mind my 3090 is power limited to 250w. Three days ago I released a hyper-optimized Qwen3.8-27B inference engine for an RTX 3090 (82 tps single re
Hey everyone! We’re releasing new Qwen3.8-27B GGUFs with 10% higher accuracy for the same size. This uses a new version of Dynamic v3.0 Unsloth Dynamic V3 outperforms others by >10% on Div-300, KLD &
https://huggingface.co/inclusionAI/Ling-3.0-tiny-base https://huggingface.co/inclusionAI/Ling-3.0-flash-base-midtrain https://huggingface.co/inclusionAI/Ling-3.0-flash-base-30T https://huggingface.co/
I have been searching for suitable model to run on my 8GB RAM toy, NVIDIA Orin Nano Super 8GB. This little toy was priced at 249 earlier this year (not any more), and pulls very little power when idle
Four Tesla V100s from 2017 matched my RTX 5090 on single-request Qwen 3.8 decode. Repo: https://github.com/dnv2003/v100-skinny https://i.redd.it/5ws2ak3uqckh1.gif The 5090 was not being held back. It
PR by u/Stainless-Bacon 👍 It would be handy & awesome to have options --n-cpu-ffn / --cpu-ffn for Dense models like how we have --n-cpu-moe / --cpu-moe for MOE models. Also check his threads: On PR :
Aloha! 🌺Introducing Ornith-1.5, a family of open-source LLMs spanning 9B Dense, 35B MoE, and 397B MoE, trained with self-improving strategies. It achieves state-of-the-art performance among open-sourc
(my own experience) I have a mid-range gaming laptop from 2024 with 4GB VRAM and 16GB RAM. There is nothing that I can run other than small models at humble t/s. I mostly use the models to generate sc
Howdy, I'm back again - running my favorite benchmark (it's still unsaturated for the time being so might as well!) previous runs a b https://github.com/michaelasper/benchmarks/blob/main/qwen3.8-27b-p
I've been working on a depth pruning approach and decided to try it out on the new Qwen3.8-27B model. I managed to get the model down to about 22.7B params without severe reasoning degradation. No fin
Intermediate tokens, called 'thinking' or 'reasoning' actually are nothing like it. Humans do step-by-step reasoning leading to the conclusion. LLMs use intermediate traces to augment their prompt. Th
SCoPE: Sightline-Coordinate Positional Encoding for Video Diffusion Transformers SCoPE adds camera sightlines as positional coordinates to a pretrained video diffusion transformer. Given a first frame
Thoughts About Scaling Law Scaling, but not only of parameters. Every model release now ends with the same question: how many parameters? It isn't a question that can be answered on its own. Parameter
Any LLM will hallucinate the world knowledge, even a 3T model. Use a 4B with a kiwix skill and local Wikipedia, 50gb and no more hallucinated world knowledge. Ask your coding agent to build your own,
Anyone tried them yet? https://huggingface.co/ornith-ai/Ornith-1.5-9B https://huggingface.co/ornith-ai/Ornith-1.5-35B-A3B https://huggingface.co/ornith-ai/Ornith-1.5-397B https://huggingface.co/ornith
ornith lab dropped new ornith 1.5 today, a 9B dense with vision and a 35B-A3B MoE, both MIT, trained on a loop that generates its own tasks. in addition there was giant 397b model, but we didn't quant
DeepSeek released on a paper on pretrained engrams in January. I’m surprised ds didn’t release engrams with v4 pro. When will ds or another lab release a fixed engram model? Fixed engrams will be the
Bonsai / Ternary Bonsai During April Bonsai came with bunch of models .... 1-bit & 1.58-bit(Ternary) versions. And last month(July) they released 27B models in same versions. Last month itself, Bonsai
I know why Qwen3.8 27B shipped with xhigh reasoning as default, it's to do its best in benchmarks. Models from top labs often get benchmarked at multiple reasoning levels, but that same treatment does
I know the front page is completely dominated by the Qwen3.8 27B. I know it's a fantastic model and everyone is rightfully discussing it, but I wanted to shift gears and talk about another model I’ve
Apparently a second version of DFlash from the original authors of DFlash GGUF quants are already made available with an accompanying llama.cpp PR: https://github.com/ggml-org/llama.cpp/pull/27342 sub
Results up front: I had to prioritize prefill or token generation - there was no happy medium. Using UD-Q4_K_XL, q8 kv cache, and 96k max context: focus on generation (MTP = 2): 350 pp and 36 tg @ 12k
Two days ago I released a hyper-optimized Qwen3.8-27B inference engine for an RTX 3090 (82 tps single request, 672 peak) - yesterday's update took that to 99 tps single-user / ~1,000 tps at 64 concurr
Here's the DFlash2 announcement, and I was pretty excited for this after trying out DSpark on llama.cpp a few days ago and being somewhat disappointed that it wasn't really working. Anyways, I spent a